CentOS 7에 Wildfly 20 설치 및 구성 - 下 > WAS 자료실

[root@wildfly20 ~]# wget https://download.jboss.org/wildfly/20.0.1.Final/wildfly-20.0.1.Final.zip

--2020-12-28 16:42:47--  https://download.jboss.org/wildfly/20.0.1.Final/wildfly-20.0.1.Final.zip

Resolving download.jboss.org (download.jboss.org)... 23.211.117.137, 23.211.117.161, 2600:1410:c000::addf:e35b, ...

Connecting to download.jboss.org (download.jboss.org)|23.211.117.137|:443... connected.

HTTP request sent, awaiting response... 200 OK

Length: 192932490 (184M) [application/zip]

Saving to: ‘wildfly-20.0.1.Final.zip’

100%[==============================================================================================>]       192,932,490 33.7MB/s   in 5.5s  

2020-12-28 16:42:52 (33.5 MB/s) - ‘wildfly-20.0.1.Final.zip’ saved [192932490/192932490]

[root@wildfly20 ~]# unzip ./wildfly-20.0.1.Final.zip -d /opt

…

inflating: /opt/wildfly-20.0.1.Final/modules/system/layers/base/io/jaegertracing/jaeger/main/module.xml 

inflating: /opt/wildfly-20.0.1.Final/modules/system/layers/base/io/netty/main/netty-all-4.1.48.Final.jar

[root@wildfly20 ~]# useradd -r -d /opt/wildfly/ -s /sbin/nologin wildfly

[root@wildfly20 ~]# cat /etc/profile

…

# Wildfly

export WILDFLY_HOME=/opt/wildfly

[root@wildfly20 ~]# source /etc/profile

[root@wildfly20 ~]# ln -s /opt/wildfly-20.0.1.Final/ /opt/wildfly

[root@wildfly20 ~]# chown -Rf wildfly: $WILDFLY_HOME

[root@wildfly20 ~]# chmod +x /opt/wildfly/bin/*.sh 

[root@wildfly20 ~]# /opt/wildfly/bin/add-user.sh

What type of user do you wish to add?

 a) Management User (mgmt-users.properties)

 b) Application User (application-users.properties)

(a): a

Enter the details of the new user to add.

Using realm 'ManagementRealm' as discovered from the existing property files.

Username : wildAdmin

Password recommendations are listed below. To modify these restrictions edit the add-user.properties configuration file.

 - The password should be different from the username

 - The password should not be one of the following restricted values {root, admin, administrator}

 - The password should contain at least 8 characters, 1 alphabetic character(s), 1 digit(s), 1 non-alphanumeric symbol(s)

Password : wildAdmin

WFLYDM0098: The password should be different from the username

Are you sure you want to use the password entered yes/no? yes

Re-enter Password : wildAdmin

What groups do you want this user to belong to? (Please enter a comma separated list, or leave blank for none)[  ]: [click enter]

About to add user 'wildAdmin' for realm 'ManagementRealm'

Is this correct yes/no? yes

… ( 중   략 ) …

Is this new user going to be used for one AS process to connect to another AS process?

e.g. for a slave host controller connecting to the master or for a Remoting connection for server to server EJB calls.

yes/no? yes

To represent the user add the following to the server-identities definition <secret value="d2lsZEFkbWlu" />

[root@wildfly20 ~]# mkdir -p /etc/wildfly /var/run/wildfly/

[root@wildfly20 ~]# chown wildfly: /var/run/wildfly

[root@wildfly20 ~]# cp $WILDFLY_HOME/docs/contrib/scripts/systemd/launch.sh $WILDFLY_HOME/bin/

[root@wildfly20 ~]# cp $WILDFLY_HOME/docs/contrib/scripts/systemd/wildfly.service /etc/systemd/system/

[root@wildfly20 ~]# cp $WILDFLY_HOME/docs/contrib/scripts/systemd/wildfly.conf /etc/wildfly

[root@wildfly20 ~]# cat $WILDFLY_HOME/bin/launch.sh

… ( 중   략 ) …

if [[ "$1" == "domain" ]]; then

    $WILDFLY_HOME/bin/domain.sh -c $2 -b $3 -bmanagement $4

else

    $WILDFLY_HOME/bin/standalone.sh -c $2 -b $3 -bmanagement $4

Fi

[root@wildfly20 ~]# cat /etc/systemd/system/wildfly.service

… ( 중   략 ) …

[Service]

Environment=LAUNCH_JBOSS_IN_BACKGROUND=1

EnvironmentFile=-/etc/wildfly/wildfly.conf

User=wildfly

LimitNOFILE=102642

PIDFile=/var/run/wildfly/wildfly.pid

ExecStart=/opt/wildfly/bin/launch.sh $WILDFLY_MODE $WILDFLY_CONFIG $WILDFLY_BIND $WILDFLY_CONSOLE_BIND

StandardOutput=null

… ( 중   략 ) …

[root@wildfly20 ~]# cat /etc/wildfly/wildfly.conf

… ( 중   략 ) …

# The console address to bind to

WILDFLY_CONSOLE_BIND=0.0.0.0

[root@wildfly20 ~]# firewall-cmd --permanent --add-port 8080/tcp

[root@wildfly20 ~]# firewall-cmd --permanent --add-port 9990/tcp

[root@wildfly20 ~]# firewall-cmd --reload                   

[root@wildfly20 ~]# systemctl daemon-reload

[root@wildfly20 ~]# systemctl enable wildfly.service --now

[root@wildfly20 ~]# systemctl status wildfly.service -l

● wildfly.service - The WildFly Application Server

   Loaded: loaded (/etc/systemd/system/wildfly.service; enabled; vendor preset: disabled)

   Active: active (running) since Tue 2020-12-29 10:38:40 KST; 1min 0s ago

 Main PID: 788 (launch.sh)

    Tasks: 59

   CGroup: /system.slice/wildfly.service

           ├─788 /bin/bash /opt/wildfly/bin/launch.sh standalone standalone.xml 0.0.0.0 0.0.0.0

           ├─789 /bin/sh /opt/wildfly/bin/standalone.sh -c standalone.xml -b 0.0.0.0

           └─866 java -D[Standalone] -server -Xms64m -Xmx512m -XX:MetaspaceSize=96M -XX:MaxMetaspaceSize=256m -Djava.net.preferIPv4Stack=true -Djboss.modules.system.pkgs=org.jboss.byteman -Djava.awt.headless=true -Dorg.jboss.boot.log.file=/opt/wildfly/standalone/log/server.log -Dlogging.configuration=file:/opt/wildfly/standalone/configuration/logging.properties -jar /opt/wildfly/jboss-modules.jar -mp /opt/wildfly/modules org.jboss.as.standalone -Djboss.home.dir=/opt/wildfly -Djboss.server.base.dir=/opt/wildfly/standalone -c standalone.xml -b 0.0.0.0

Dec 29 10:38:40 jbas6 systemd[1]: Started The WildFly Application Server.